3.5 lbs. Jersey Miner’s Axe w/ 26 in.Handle

3.5 lbs. Jersey pattern single bit axe with 26 in. straight handle. Known as a miner’s axe, the tool features a short handle used for close quarters work. Cutting edge is approximately 5″ of overall length and the poll is square.

• Forged steel head. Made in USA.
• Hand sharpened, tapered bit for cutting and splitting.
• ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 in. from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition.
• Head coated with red enamel and cutting edges in clear lacquer to deter rust.
• 26 in. straight American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening.
• Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge. The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content.
• The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2 in. of the overall length of the handle is removed during assembly.

Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov.

There are no reviews yet.